SHOWTEC 40158, Руководство пользователя

Страница: 15 / 28

14
Ordercode: 40158
XS-1W
1. DMX Addressing
With this menu you can set the DMX address.
01)
Press the MENU button and then the Up / Down buttons, until the display shows .
02)
Press the ENTER button to open this menu. You can choose 512 different DMX addresses.
03) Use the Up / Down buttons to select the required address from .
04) Once you have set the desired DMX address, press the ENTER button to store your DMX address.
2. Channel Mode
With this menu you can set the Channel Mode.
01)
Press the MENU button and then the Up / Down buttons, until the display shows .
02) Press the ENTER button to open this menu.
Use the UP/DOWN buttons to change the setting from 5CH to 10CH. .
03) Once you have set the desired Mode, press the ENTER button to store your setting.
3. Slave Mode
With this menu you can set the Master or Slave Mode.
01)
Press the MENU button and then the Up / Down buttons, until the display shows .
02) Press the ENTER button to open this menu.
03) Use the UP/DOWN buttons to toggle between the following Auto modes:
Master mode
Normal slave mode
Mirror slave mode
04)
Press the SETUP button to store your setting.
4. Auto programs
01) Press the MENU button and then the Up / Down buttons, until the display shows .
02) Press the ENTER button to open this menu.
03) Use the UP/DOWN buttons to toggle between the auto programs:
-
Auto Program 0 - 12
Sound-controlled
04) Press the SETUP button to confirm your choice.
5. Sound control Mode
With this menu you can set the Sound control.
01)
Press the MENU button and then the Up / Down buttons, until the display shows .
02) Press the ENTER button to open this menu.
Use the UP/DOWN buttons to change the setting from Off to On .
03) Once you have set the desired Mode, press the ENTER button to store your setting.
04) If the device has been set to Off, the device will not react to the beat of the music.
05) If the device has been set to On, the device will react to the beat of the music.