Showline SL NITRO 510C Скачать руководство пользователя страница 15

Страница: 15 / 56

Mounting SL NITRO 510C LED STROBE Luminaire with Other Luminaires

SL NITRO 510C LED STROBE Luminaire

Installation & User’s Manual

Sh wline

Connecting Combined Luminaires Top-to-Bottom

When combining units connected top-to-bottom, two SL NITRO 510C LED STROBE Luminaires are first connected
end-to-end and then connected top-to-bottom with a single SL BAR 520 luminaire.

Connecting Notes:

WARNING!

Do not exceed 10 rows of combined luminaires connected together top-to-bottom with a single hanging

point. If more than 10 rows are required, each ten rows must use its own connection to a fixed object.

• The two SL NITRO 510 units must have all three side-to-side pins installed (refer to

Figure 11

and

"Connecting

Luminaires Side-to-Side" on page 12

Figure 11: SL NITRO 510C LED STROBE Luminaires - Connections

• When two SL NITRO 510C LED STROBE Luminaires are combined with a SL BAR 520, there is no top-to-bot-

tom connection available in the center.

• When a SL BAR 520 unit is mounted below the two SL NITRO 510C LED STROBE Luminaires, the top-to-bot-

tom connections will rest on the center of the SL BAR 520, preventing the units from spreading apart in the center.

• If the bottom of a configuration has two SL NITRO 510C LED STROBE Luminaires below a single SL BAR 520,

connect the bottom center top-to-bottom connections with the following hardware (available from others) to pre-

SL BAR 520 LED Luminaire

SL NITRO 510C LED

SL BAR 520 LED Luminaire

STROBE Luminaires

Содержание SL NITRO 510C

























































Результаты поиска

Содержание SL NITRO 510C

Отзывы:

Похожие инструкции для SL NITRO 510C

Бренды по названию

Популярные бренды

Showline SL NITRO 510C, Инструкция по установке и эксплуатации

Результаты поиска

Содержание SL NITRO 510C

Отзывы:

Похожие инструкции для SL NITRO 510C

Бренды по названию

Популярные бренды