Showline SL BAR 510 Скачать руководство пользователя страница 47

Cleaning and Care

45

Being a solid

-

state fixture

and unlike most

 

fixtures

the SL BAR 510/510N

 

RGBW

 

LED

 

Luminaire requires very

little routine maintenance by the user. This section covers portions of the luminaire that can be removed for cleaning.

The SL BAR 51 0/510N RGBW LED Luminaire special care when it comes to cleaning front lens assembly. Additional
care needs to be taken with the plastic components because they are much easier to scratch or damage than glass.

The following is a list of cleaning materials

 

required

 

to care for your SL BAR 510/510N RGBW LED

 

Luminaire

:

Note

:

 

*

Reagent grade isopropyl alcohol

 

is

 

good

 

to

 

use

 

on

 

the

 

SL

 

BAR 510/510N

 

RGBW

 

LED

 

Luminaire plastic optics

  

with anti

-

reflection coatings

.

WARN ING!   Under no circumstances should ammonia-based cleaners, acetone, or other harsh solvents be used on or 
near the SL BAR 510/510N RGBW LED Luminaire. These types of cleaners or solvents can permanently damage the
optics or housings

 

of

 

the fixture

.

If you have any questions regarding the use or care of your SL BAR 510/510N RGBW LED Luminaire, please contact
Showline technical support or your local Authorized Dealer.

WARNING!

 All cleaning should be performed with power completely removed from the luminaire. Never remove

protective covers when luminaire is powered. Wear appropriate protective eye wear and gloves when cleaning the 
fixture. All service and maintenance, other than described herein, should be performed by a qualified technician or 
Authorized Service Center.

Lint free lens tissue
Lint or powder free gloves 
Reagent grade isopropyl alcohol*
A mild soap solution

If the lens is still dirty after using isopropyl alcohol, for instance if figerprints or oil is just redistributed and not 
cleaned off the optic, then a mild soap and water solution can be used to gently wash the lens. Repeat the cleaning
with isopropyl alcohol to eliminate streaks and soap residue.

Step  1.  Turn off luminaire and allow to cool completely.
Step  2.   Apply a small amount of reagent grade isopropyl alcohol to lint-free lens tissue.
Step  3.   Wipe all debris, dirt, fingerprints, etc. from lens.
Step  4.    Using a second lint-free lens tissue, wipe off any alcohol residue.

For all other service and maintenance issues, please contact your local Showline office or an Authorized Service
Center.

1. Special Cleaning and Care Insturctions

2. Front Lens Cleaning

3. Service and Maintenance

Installation & User’s Manual

SL BAR 510/510N RGBW LED Luminaires

WARNING! 

 Disassembly ( other than as described herein), alterations, unauthorized service, etc. will void the 

product warranty. Contact your local Showline office or an Authorized Service Center for technical support and 
service.

Содержание SL BAR 510



















































Отзывы: