4
Ordercode: 950300
VIBE FX Polar Beat
●
If the lens is obviously damaged, it has to be replaced, so that its functions are not impaired due to
cracks or deep scratches.
●
If device was dropped or struck, disconnect mains power supply immediately. Have a qualified
engineer inspect for safety before operating.
●
If the device has been exposed to drastic temperature fluctuation (e.g. after transportation), do not
switch it on immediately. The arising condensation water might damage your device. Leave the
device switched off until it has reached room temperature.
●
If your Showgear device fails to work properly, discontinue the use immediately. Pack the unit
securely (preferably in the original packing material), and return it to your Showgear dealer for
service.
●
For adult use only. The fixture must be installed beyond the reach of children. Never leave the unit
running unattended.
●
Never attempt to bypass the thermostatic switch or fuses.
●
For replacement use fuses of same type and rating only.
●
The operation of a class 2 laser show laser is only allowed if the show is controlled by a skilled and
well-trained operator familiar with the data included in this manual.
●
The user is responsible for correct positioning and operating of the Polar Beat. The manufacturer will
not accept liability for damages caused by the misuse or incorrect installation of this device.
●
This device falls under protection class I. Therefore it is essential to connect the yellow/green
conductor to earth.
●
The laser will only work between 10-40ºC.
●
After 3 hours working, you must shut off the laser and let the laser diode cool off for 30 minutes.
Otherwise the laser could become damaged and the warranty becomes void.
●
Repairs, servicing and electric connection must be carried out by a qualified technician.
●
WARRANTY: Till one year after date of purchase.
Operating Determinations
●
This device is not designed for permanent operation. Consistent operation breaks will ensure that the
device will serve you for a long time without defects.
●
The minimum distance between light output and the illuminated surface must be bigger than 1
meter.
●
The maximum ambient temperature t
a
= 40°C must never be exceeded.
●
The relative humidity must not exceed 50 % with an ambient temperature of 40°C.
●
If this device is operated in any other way than the one described in this manual, the product may
suffer damages and the warranty becomes void.
●
Any other operation may lead to dangers like short-circuit, burns, electric shock, crash, etc.
You endanger your own safety and the safety of others!
Содержание VIBE FX Polar Beat
Страница 16: ...2017 Showgear...
