- 2 -
Never Intake the following, as they may cause malfunction.
High-temperature gas and heat-generating substances
Gas at 40°C or higher that is suctioned in or generated within the machine by heat-
generating materials may cause insulation failure of internal electric components.
Adhesive dusts
The filter cloth may clog if dust adheres to it and cannot be shaken.
Solid materials such as workpieces and tools
These objects may damage the duct, filter cloth, etc.
Fine powder dust
such as carbon
(5 μm or less)
Powder dust may leak if a standard filter cloth is used. Use a high-performance filter
cloth.
Light powder dust such as feather, cotton, paper and styrene foam dusts
These objects may get entangled internally and suspend without falling.
Highly abrasive powder dust such as glass powder and abrasives
The filter cloth may be perforated due to wear and powder dust may leak.
Furthermore, the duct and main body of the machine may be punctured.
Corrosive gas and mists
The machine main body and parts may corrode.
Do not apply high pressure to this machine with other pressure machines.
Never increase operation speed using an inverter, etc.
Doing so may cause damage to the blower.
Except when reusing the material collected by this machine, dispose of it appropriately
in accordance with the relevant laws and regulations set by national and local
governments. Dispose of old filter cloths and other wastes similarly.
This machine collects 5μm or larger-sized particles with a standard filter cloth and 1μm or larger
particles with an optional high-performance filter cloth. Powder dust amount must be 1g or less per
1 m
3
/min of air. If the intake powder dust is beyond this performance range, it is possible that dust
will leak through the filter cloth, pressure loss of filter cloth increases, or clogging, etc. will occur.
CAUTION
