5. WIRING AND USING TERMINAL COVER
Notes
• For the speaker cable, use a cable with a diameter of 6mm, which will fit the cable bushing.
• To ensure waterproof capabilities, firmly mount the terminal cover to the speaker and tighten the bushing on the
cover.
Step 1:
Feed the speaker cable through the bushing and terminal cover, then connect the cable to the input
terminal.
Step 2:
Attach the terminal cover to the speaker.
Attach the cover while pulling the cable so that it is not entangled inside the terminal cover.
Step 3:
Hold the terminal cover tightly to the speaker using the supplied screws.
Step 4:
Tighten the bushing.
Note:
After tightening the bushing by hand, use a tool to further tighten it another 90º (1/4-turn) or so. Note that
parts can be damaged by over-tightening.
6. INSTALLATION
Note: Commercial audio installation system must conform to local building laws. When install speaker on wall or
ceiling, please consult a building constructer with a license or a professional engineer. The corporation won't be
responsible for the improper installation or damage because of not conforming to installation description.
Installation procedure of CS-3 bracket is very simple and convenient, the appearance is pleasing to the eye.
Step 1:
Fasten the CS-3 bracket(1) on the wall with screws. The wall material must support the weight of the
cabinet.
Step 2:
Place the body of cabinet in CS - 3 bracket(2) and lock the screws tightly.
Step 3:
Use screw (3) lock CS-3 bracket(1) and CS-3 bracket(2). Mand use steel rope (4) to connect two brackets.
3
3
Содержание CSB-20T
Страница 2: ...1...
