4
The powercable may not be modified, broken, mechanically strained, pressed together or
heated.
The cable insert or the female part in the device must never be strained. There must always be
sufficient cable to the device. Otherwise, the cable may be damaged which may lead to deadly
electrical shocks.
If the external cable is damaged, it has to be replaced by a qualified technician.
If the laser is obviously damaged, it has to be replaced. So that its functions are not impaired, due
to cracks or deep scratches.
Never hit the laser with a hammer or other tools, as this may lead to damages.
Make sure that this product is recycled at the end of its life to protect our environment.
If device is dropped or struck, disconnect mains power supply immediately. Have a qualified
engineer inspect for safety before operating.
If the device has been exposed to drastic temperature fluctuation (e.g. after transportation), do
not switch it on immediately. The arising condensation water might damage your device. Leave
the device switched off until it has reached room temperature.
If your Showtec device fails to work properly, discontinue use immediately. Pack the unit securely
(preferably in the original packing material), and return it to your Showtec dealer for service.
For adult use only. Lighteffect must be installed out of the reach of children. Never leave the unit
running unattended.
For replacement use fuses of same type and rating only.
The user is responsible for correct positioning and operating of the laser. The manufacturer will not
accept liability for damages caused by the misuse or incorrect installation of this laser.
This device falls under protection class I. Therefore it is essential to connect the yellow/green
conductor to earth.
The laser will only work between 15-35ºC.
After 3 hours working, you must shut off the laser and let the laser diode cool off for 30 minutes,
otherwise the laser could be damaged and the warranty becomes void.
Repairs, servicing and electric connection must be carried out by a qualified technician.
WARRANTY: Till one year after date of purchase.
CAUTION: AVOID EXPOSURE TO BEAM: Avoid direct eye contact with laser
light. Never intentionally expose your eyes or others to direct laser radiation.
Compliance Statement
Your Shogun Laser has been designed to comply with FDA and IEC Standards for it classification.
The Shogun is a Class IIIB laser product.
Laser Safety and Compliance Information
The Shogun is manufactured to comply with the IEC 60825-1 and in accordance with U.S. Food and Drug
Administrations (FDA) Standards Listed under FDA Document 21 CFR 1040 and subsequent laser notices.
Further more, the Shogun manufactured to comply with Directive 2002/96/EC of the European Parliament
and of the Council of the European Union on WEEE (Waste Electrical and Electronic Equipment), as
amended by Directive 2003/108/EC, where applicable.
Laser Safety is made and regulated by different authorities in each country:
• In Europe, the European Norm-organization CENELEC
• In the United States of America, the Center for Devices and Radiological Health [CDRH]
• In Canada, the Radiation Protection Bureau (RPB)
Contact these authorities for detailed information, about the safety regulations that apply to your
country. Note: safety regulations can differ from those described in this manual. Always check the
required regulations before operating this laser
