CONTROL BOARD INSTRUCTION
POWER INPUT:
POWER ON/OFF:
Donwload2 :
MIC:
MIN-MAX:
ADDRESS:
ILDA DB 25 F Connector
NOTE:
1.
PC SIGNAL IN
ILDA DB 25F connector
s
2.
3.
PC SIGNAL IN
ILDA DB 25F Connector
Input power, with inner fuse.
power on/off
Download method 2 used
Receive Music.
Music sensitivity potentiometer
the 10 code is switch code. When the 10 code is OFF, 1~9 are
function codes. When function code is 0, the working mode is Music Active
(Master mode); when function code is 1, the working mode is Automatic (Master
mode); when function code is 2 or more, the working mode is Slave mode. When
the 10 code is ON,1~9 will be DMX address codes. The address code of first
light usually by 1, the second light is 14 and so on.
: signal input connection port of the laser perform
software that in accordance with the ILDA standard.
When
and
connection port are free,
the lamp will drive by the inside program, temporality it can control by music or
DMX 512 signal.
After connect the ILDA DB 25F, The lamp will change to ILDA connected port
drive mode ,this connection port can receive all the signal of laser perform
software that accord with the ILDA stand rd, such as LD-2000 of Pangolin
Company.
4.When the
and the
were connected, then
the system will at an abnormal statement, lamp still control by inside program ,
but not respond to the exterior input signal.
PC SIGNAL IN/OUT:
DMX IN/OUT:
PC SIGNAL IN
USB connection port signal input/output
DMX 512 signal input/output
When
connects with USB interfacial card, the lamp will be
control by software which was installed in the computer.
a
th
th
th
’
Po w e r 1 2 0W Cla ss 1
Re d L as e r Class 3 B 6 35 n m >1 5 0m W
G re e n L a s er Clas s 3 B 5 3 2n m >6 0 mW
Blu e L a s er Clas s 3 B 4 7 3n m >1 0 0m W
RGB LASER
Содержание Shogun 3D+RGB
Страница 1: ...Shogun 3D RGB ORDERCODE 30974...
Страница 9: ...2005 Showtec...
