Show Atelier DIALighting LED Par IP65 White, Руководство пользователя

Страница: 3 / 4

SETUP
UP/DOWN
UP/DOWN
UP/DOWN
UP/DOWN
UP/DOWN
UP/DOWN
UP/DOWN
2
、
Working mode
a
、
Built-in Program mode
1
、
This is built-in program mode
，
the effect of gradation of single color,press “SETUP” button to
set the speed of gradation as below:
2
、
Continue to press SETUP button to set the strobe of gradation as below
：
b
、
Master/slave Mode
This mode is M/S Mode; the salve fixtures will follow the programs after they were linked to the
master fixture via DMX cables.
c
、
DMX Mode
This is DMX mode. When it is linked with DMX cable, it could be controlled by controller or
software.
1.DMX Address setting
2.Channel setting
3.Channel protocol
a、
CH1
Dimmer
0~255
b、
CH1 CH2 CH3
Dimmer Mode Strobe
0~255
0~4
5~255
Sound 5~255
(Sensitivity)
d
、
Sound-active mode
Press “UP” or “DOWN” button, setup sensitivity of sound active value
：
e
、
Dimming mode
this is dimming mode,free to set the brightness values as below
：
f
、
Setting mode
This mode is setting mode. There are two options
SETUP
SETUP
SETUP
SETUP
SETUP