ShoreTel Extreme Summit x440 Series, Руководство по настройке

Страница: 9 / 20

960 Stewart Drive Sunnyvale, CA 94085 USA Phone +1.408.331.3300 +1.877.80SHORE Fax +1.408.331.3333 www.ShoreTel.com
- 9 -
EXTREME Configuration
This following section describes basic configuration procedures for the EXTREME Summit x440 Series Switches.
Sample Configuration
This Application note assumes basic routing configuration has been completed. The following sample switch
configuration should be used only for reference and actual configuration for customer may vary.
#
# Module devmgr configuration.
#
configure snmp sysContact "support@extremenetworks.com, +1 888 257 3000"
configure sys ‐ recovery ‐ level switch reset
#
# Module vlan configuration.
#
configure vlan default delete ports all
configure vr VR ‐ Default delete ports 1 ‐ 24
configure vr VR ‐ Default add ports 1 ‐ 24
configure vlan default delete ports 1 ‐ 23
create qosprofile "QP4"
create qosprofile "QP6"
create vlan "data"
configure vlan data tag 2
create vlan "voice"
configure vlan voice tag 3
enable diffserv examination port 1
disable dot1p examination port 1
enable diffserv examination port 2
disable dot1p examination port 2
enable diffserv examination port 3
disable dot1p examination port 3
enable diffserv examination port 4
disable dot1p examination port 4
enable diffserv examination port 5
disable dot1p examination port 5
enable diffserv examination port 6
disable dot1p examination port 6
enable diffserv examination port 7
disable dot1p examination port 7
enable diffserv examination port 8
disable dot1p examination port 8
enable diffserv examination port 9
disable dot1p examination port 9
enable diffserv examination port 10
disable dot1p examination port 10
enable diffserv examination port 11
disable dot1p examination port 11
enable diffserv examination port 12
disable dot1p examination port 12
enable diffserv examination port 13
disable dot1p examination port 13