DETAIL C
(Rear)
DETAIL D
(Rear)
DETAIL B
(Front)
DETAIL A
(Front)
C
D
B
A
STEP 2
Attach one Bottom Beam to the front of both Lift Sides. Secure each
end of the Bottom Beam with five Bolts 1/2 x 5.5, ten Washers Flat 1/2
and five Nuts 1/2 - as shown in Detail "A" and "B."
Note:
The front is indicated by the Winch Mount Upright - as shown.
Note:
Bolt only five of the six holes at each corner at this time. The
remaining hole will be used in a later step. See each detail for the one
connection hole (in each front corner) not used at this time.
STEP 3
Attach the Bottom Beam to rear of the Lift Sides. Secure with Five Bolts 1/2 x 5.5, ten Washers Flat 1/2 and five Nuts 1/2 - as
shown in Detail "C" & "D."
Note:
Bolt only five of the six holes at each corner at this time. The remaining hole will be used in a later step. See each
detail
for the one connection hole (in each rear corner) not used at this time.
Winch Mount
Upright
Bottom Beam
Lift Side
THIS HOLE
NOT USED AT
THIS TIME
Lift Side
Bottom Beam
Front
Rear
THIS HOLE NOT
USED AT THIS TIME
THIS HOLE NOT
USED AT THIS TIME
Bolt 1/2 x 5.5
Washer Flat 1/2
Bolt 1/2 x 5.5
Washer Flat 1/2
Nut 1/2
Washer Flat 1/2
Washer Flat 1/2
Washer Flat 1/2
Washer Flat 1/2
Washer Flat 1/2
Washer Flat 1/2
Washer Flat 1/2
Washer Flat 1/2
Washer Flat 1/2
Washer Flat 1/2
Bolt 1/2 x 5.5
Bolt 1/2 x 5.5
Bolt 1/2 x 5.5
Bolt 1/2 x 5.5
Bolt 1/2 x 5.5
Bolt 1/2 x 5.5
Nut 1/2
Nut 1/2
Nut 1/2
Nut 1/2
THIS HOLE NOT
USED AT THIS TIME
