DETAIL B
DETAIL A
DETAIL C
SCALE 1 /25
B
A
C
STEP 3
Measure 111" from the Deck mount Plate and make a mark on the dock -
as shown.
Lay the Slide Ladder Base flush with the mark and in line with the Deck
Mount Plate. Make a mark on the dock at each hole. Move the base and
drill a 7/16" hole at each mark - as shown.
Secure Slide Ladder Base to dock with 3/8" diameter hardware in four
places.
STEP 4
Attach the Slide Ladder to the Slide Ladder Base with two
Bolts 3/8" x 1-1/4", four Washers Flat 3/8", two 3/8" Lock
Washers, and two Nuts 3/8" Brass - as shown in Detail "A."
Attach the Poly Slide to the Deck Mount Plate with six Pan
Screws #12 x 3/4" - as shown in Detail "B"
CAUTION
Secure with four connection bolts and
locking hardware(lock nuts, lock washers,
etc.), not provided. Failure to do so could
results in serious injury or death.
Poly Slide
Pan Screw
1/4" x 3/4"
Deck Mount Plate
Slide Ladder Base
Sldie Ladder
Bolt 3/8" x 1-1/4"
3/8" Flat Washer
3/8" Lock Washer
3/8" Brass Nut
111"
Slide Ladder Base
Slide Ladder
Base
Deck Mount Plate
4
