background image

®

Made in the USA

Midwest Industries, Inc. Ida Grove, IA  51445 (800)859-3028

                    0002785

www.shorelandr.com

REV  - 7/06/00

2X3 Long Tongue Option (S-TL)

Tongue:

Remove the tongue assembly from the frame bundle and
install into the tongue channel and secure with a 1/2” X 4”
hex bolt in the side of the tongue and tongue channel.
Secure with a 1/2” flange lock nut.

Place the tongue cover over the rear of the tongue and
tongue channel and secure with a 1/2” X 1-1/2” hex bolt,
1/2” flat washer and 1/2” hex nut.

Tongue Wires:

Install the tongue wire harness through the top forward
wire hole and exit the rear of the tongue channel on the
frame. Install grommets and plug the tongue wire into the
frame harness by color.

Safety Chain:

Insert a 3/8” X 1-1/4” hex bolt with a 3/8” flat washer and
safety chain through the lower hole on the front of the
tongue. Secure with a 3/8” flat washer and 3/8” flange lock
nut. Repeat the procedure on the opposite side of the
tongue.

Coupler:

Mount the coupler onto the tongue with one (1) 1/2” X 4”
hex bolt into the rear of the couplerand tongue and using
two (2) 1/2” X 1” hex bolts into the two (2) front holes on
the coupler and tongue. Secure with 1/2” flange lock nuts.

REF# PART#

DESCRIPTION

QTY

1

62091--

TONGUE 3X3X60 ...................................... 1

2

0110037 HH 3/8-16 X 1 1/4 CS GR5 ....................... 2

3

0110114 HH 1/2-13 X 4 CS GR5 ............................. 1

4

0140090 HH 1/2-13 X 1 CS GR5 ............................. 2

5

0810925 SCREW SELFDRILL HWH #10-16 X 3/4 . 4

6

1340095 WASHER USS FLAT 3/8 ........................... 4

7

1440101 FLANGE LOCKNUT SMALL 3/8-16 .......... 2

8

1440102 FLANGE LOCKNUT SMALL 1/2-13 .......... 3

9

2210155 CHAIN 3/16X20 LINK CHAIN ................... 2

10

3100010 COUPLER #980 P2 ASSEMBLED ............ 1

11

3510030 GROMMET  7/8IN MOLDED .................... 1

12

5110127 REFLECTOR ANDERSON AMBER ......... 2

13

5110318 9' TONGUE HARNESS ............................. 1

14

5110394 DO RAY JUMPER WIRE 24 IN ................. 1

15

5110456 LIGHT AMBER SIDE MARKER  36IN WI . 2

Содержание SLB20L











Отзывы: