4
SECTION ONE, PRE-ASSEMBLY
Shipment Inventory And Inspection
Shipment Inventory
Upon arrival, unpack and inspect the shipment to ensure it is complete and free of any
damages that may have occurred during shipping. Compare the packing list with the
shipment to ensure all parts/components have been received.
This Guide can be used to identify parts and their associated part numbers listed on the
packing slip.
Shipment Inspection
While verifying the shipment contents, take a moment to inspect each component for
damage. This should be done before the shipment is signed received and accepted.
If damaged components are apparent, follow the instructions within Shor-Line’s
Damage
and Freight Procedures.
Damage Reporting
Follow the instructions within Shor-Line’s
Damage and Freight Procedures.
Contact Shor-Line (800.444.1579) immediately to expedite replacements or repairs.
After fifteen (15) calendar days of receipt of merchandise, this policy becomes void.
Table Base
Continuum Table Base
The Continuum table base utilizes a non-rotational
hydraulic cylinder to lift the table top from 29" up to 41".
The height of the table top can be raised by partially
depressing the foot operated pedal, repeating to
gradually raise the top.
Depress and hold the foot operated pedal to lower the
table top surface.
Enlist help and USE SAFE LIFTING PRACTICES during assembly, installation and while
moving equipment.
FIGURE 1.1 - Continuum Table Base
SECTION
ONE
