Shoprider TE-889NR, Руководство пользователя, Страница: 9 / 20

9
Seat Slide & Swivel Adjustment (Fig. 4)
Pulling up on the seat slide lever allows the
seat position to be adjusted forward or
backward. Release the lever and the seat
will lock in that position. Under the right
side of the seat there is a spring loaded red
lever. Pulling up on the lever allows the seat
to swivel, when released the seat will lock
into one of 3 positions.
Seat Removal (Fig. 5 )
Fold down the back of the seat. Pull up the
swivel seat adjustable lever (fig. 4) and lift
seat off.
Seat Height Adjustment (Fig. 5)
Remove seat as described above. Loosen
seat tightening bolt by hex key wrench.
Remove the locking pin that secures the seat
adaptor. Lift the seat adaptor out of the seat
post. The seat height can be adjusted to
different settings by inserting the steel locking
pin in the required hole. Retighten the bolt and
replace the seat.
Armrest Width Adjustment (Fig. 6)
On the underside of the seat there are two
hand knobs, one either side. Loosening the
hand knob allows the armrest to be adjusted
to the required width, or removed for
transportation.
Do not use the scooter without the arms
being fitted.
Armrest Adjustable
Tightening Knob
Fig. 6
Swivel Seat
Adjustable Lever
Seat Slide
Lever
Fig. 4
Seat Tightening Bolt
Seat Locking Pin
Seat Post
Fig. 5