urther Information
F
Safety Information Regarding Electromagnetic Interference (EMI)
ditions.
as soon as
olar Energy
of sunny weather, it is possible that surfaces of your scooter
ealth Factors
product has been assessed on the user’s current state of
d adhere to the guidelines set out in this manual and in the
eneral Use
the information given in this manual regarding safety and the
er in electrical storms, high winds or prolonged
torage and General Care
oter is always stored in a dry environment such
roduct Stability
red wheelchairs are designed to allow the user flexibility of
Scooters and powerchairs are designed to operate under certain con
However, radio waves or electromagnetic fields may affect the operation of
the scooter. The source of EMI could be radio or television transmitters or
portable devices such as mobile phones, portable CB radios etc.
Should any unintentional movement occur turn the scooter off
safely possible.
S
During periods
may reach high temperatures (as with motor vehicles). Please take
precautions if leaving the scooter in direct sunlight for any period of time.
Seek shade or cover the seat and hand controls to keep any temperature
increases to a minimum.
H
Suitability for this
health. It is essential that the user regularly monitor their ability to use the
scooter safely.
Please read an
‘Code of practice for Class 3/C vehicle users’
G
Take heed of
maintenance of your scooter. If adhered to, your scooter should give you
years of reliable mobility.
DO NOT use the scoot
downpours. Care must also be taken during cold weather due to icy surfaces.
S
We recommend that the sco
as a garage or shed to protect the chassis and other components from
corrosion or water damage. Do not leave the scooter outside during
rainstorms. If the scooter is wet, wipe with a dry cloth to ensure there is no
ingress of water into the internal components of the scooter
(If the scooter
needs to be cleaned, use a mild detergent and warm water with a damp
sponge or cloth. DO NOT throw water over the scooter)
.
P
Scooters and powe
movement in restricted areas. Driving at maximum speed and attempting
sharp turns can create a situation where the product becomes unstable.
Therefore it is essential that the user pay attention the guidance set out in this
manual.
14
