10
SCOOTER TILLER CONTROLS (Fig. 4)
(1) Speed Controls
The speed control allows you to set a speed between 1 (minimum) and 10 (maximum).
Turn the dial knob counter-clockwise to “minimum” to decrease speed, and clockwise
towards “maximum” to increase your speed.
(2) LED Battery Level Indicator
The gauge is marked from “E” empty, to “F” full. For extra clarity there is a colored
graduated scale ranging from RED, (E) through YELLOW to GREEN, (F).
GREEN indicates ready for use.
YELLOW indicates batteries to be charged as soon as possible.
RED indicates charge batteries immediately.
(3) Horn
A yellow button operates the horn.
(4) On/Off Key Switch
Insert the key in the right side of the tiller. Turn the key on and the LED Indicator lights will
indicate the battery charge. There is a delay before the thumb/finger lever control can be
operated, while the controller is checking the circuits.
(5) Thumb/Finger Lever Controls
The left thumb/finger lever controls the reverse and the right thumb/finger lever controls the
forward motion. The amount of pressure applied to each lever will determine the speed the
scooter travels at. Release the lever and the scooter will slowly come to a stop and the
electromagnetic brake will be applied.
Electromagnetic Brake
The brake is automatically operated when the control levers are released. There is a slight
delay when the scooter decelerates; this allows the scooter to come to a smooth stop.
5
4
3
5
Fig. 4
1
2
