Page - 9 -
Seat Slide & Swivel Adjustment.
Pulling up on the seat slide lever allows the seat position
to be adjusted forward or backward. Release the lever
and he seat will lock in that position. Under the right side
of the seat there is a spring loaded red lever. Pulling up on
he lever allows the seat to swivel, when released the seat
will lock into one of 3 positions.
Seat Removal.
Fold down the back of the seat. Pull up the
swivel seat
adjustable lever (fig. 4) and lift
seat off.
Seat Height Adjustment
Remove seat as described above. Loosen seat tighten
-
ing bolt by hex key wrench. Remove the locking pin that
secures the seat adaptor. Lift the seat adaptor out of the
seat post. The seat height can be adjusted to 3 different
settings by inserting the steel locking pin in the required
hole. Retighten the bolt and replace the seat.
Armrest Width Adjustment.
On the underside of the seat there are two hand knobs,
one either side. Loosening the hand knob allows the arm
-
rest to be adjusted to the required width, or removed for
transportation.
Do not use the scooter without the arms being fitted.
Slide Lever
Adjustable
Lever
Seat Adaptor
Seat Tightening
Bolt
Seat Locking
Pin
Armrest Adjustable
Knob