Control Features
page 5
There are three basic styles of controls
panel on SHOPRIDER™ scooters
(see figures 1&2&3).
1. Key switch:
Located on the right hand side of the
control panel (figures 1&2&3).Vertically
insert key; this is the OFF position.
Turn key to horizontal position or the
ON position.The scooter is now fully
operational.
All the controls features listed below
are now functional.
2. Battery Indicator:
These will light up when the key is in
the ON position.
Located below the speed adjustment
dial (figures 1&2&3). On turning the key
in the ON position you will notice that
the gauge lit up indicating the amount
of charge left in your batteries.
As the batteries lose their charge, the
lights will go from full to empty.
3. Speed Adjustment Dial:
The round dial on the upper portion of
your control panels (figures 1&2&3).
This allows you to select your desired
top speed.The dial may be set from 0 to
10, your top speed.
Simply turn the dial counter-clockwise to
go slower, or clockwise to go faster.
4.Thumb Lever Control (Wig Wag):
Located under the hand grips (figures
1&2&3).The direction of travel is con-
trolled with the wig wags.
“F”
stands for forward,
“R”
stands for reverse.
The amount of pressure applied will con-
trol the speed.When the wig wag is
released, the SHOPRIDER™ will stop
gently, as the brake engages.
5. Horn:
Yellow button located below the wig wag
(figure 2).
Yellow button located above the wig
wag (figure 1&3).
6. Headlight Button: (figures 1&2&3)
Blue button located below the wig wags.
Press to turn headlight ON, press again to
shut OFF.
024543_Shoprider_V2.qxd 10/3/08 11:07 AM Page 7