ASSEMBLY INSTRUCTIONS
READ ALL INSTRUCTIONS BEFORE YOU BEGIN. DO NOT JUMP AHEAD OF ANY STEP.
shopPOPdisplays makes no claim that these assembly instructions cover all details, conditions or variations, or that they cover all possible contingencies in connection with the assembly or installation of
this product. It is the Purchaser's responsibility to ensure that all components of this product are properly assembled and installed in accordance with these instructions. shopPOPdisplays assumes no
obligation or liability on account of any third-party recommendations, opinions or advice as to the assembly or installation of this product.
page
2
of
2
Clear Acrylic L Shape Barrier - 29.5"H
PARTS LIST:
*NO TOOLS REQUIRED
*TWO PERSON ASSEMBLY RECOMMENDED
Side Panel
Upright
(1 pc)
Main Panel
Upright
(1 pc)
90 Degree
Connector
(3 pcs)
STEP 2:
Stand up the Side
Panel Upright and push one
of the 90 Degree Connectors
onto the front edge of the
Side Panel Upright.
ASSEMBLY COMPLETED
12832 (Set of 2)
STEP 5:
Make sure all of the 90 Degree Connectors are pushed in and fully engaged with each of
the panels, and the product is rested on a flat surface.
12831
STEP 1:
Peel off the protective plastic film from both sides of Main Panel Upright & Side Panel Upright.
NOTE: Make sure
top edges of Side Panel Upright and
Main Panel are flush with each other
STEP 4:
Push the 90 Degree
Connectors from the
assembled Side Panel Upright
onto one of the sides of the
Main Panel Upright.
STEP 3:
Push the other two 90
Degree Connectors onto the Side
Panel Upright, spacing them out
to the desired distance. Make
sure all 90 Degree Connectors
are facing the same direction.
H-Connector
(1 pc)
INCLUDED WITH
ITEM 12832 ONLY:
USE SUPPLIED H-CONNECTOR TO
ATTACH OPEN ENDS OF MAIN
PANELS TOGETHER
