To. reduce. your. risk. of. serious. injury.
or. damage. to. the. machine,. read. this.
entire.manual.BEFORE.using.machine.
To.help.prevent.material.build-up.from.
obstructing. dust. chute. and. negatively.
impacting.cutterhead.operation,.always.
remove.dust.port.if.operating.machine.
without.a.dust.collection.system.
Figure.1
. Main components.
Figure.2
. Fence components.
-6-
Model W1876 (For Machines Mfd. Since 7/20)
IN
TR
O
DU
CT
IO
N
Controls.&.Components
Refer to
Figures.1.
&
2.
and the following descriptions to
become familiar with the basic controls and components
of this machine. Understanding these items and how they
work will help you understand the rest of the manual and
stay safe when operating this machine.
A.. Outfeed.Table:
Supports workpiece after it passes
over cutterhead.
B.. Cutterhead.Guard:
Covers cutterhead until
pushed aside by workpiece during operation. When
workpiece leaves cutterhead, guard springs back to
its starting position. DO NOT operate jointer if guard
is not functioning properly.
C.. Infeed.Table:
Supports workpiece before it reaches
cutterhead. Height of infeed table relative to
cutterhead determines depth of cut.
D.. Infeed.Table.Adjustment.Knob:
Adjusts height of
infeed table to control depth of cut.
E. Table Height Lock Knob: Tighten to secure infeed
table position; loosen for table adjustment.
F.. ON/OFF.Paddle.Switch.w/Removable.Key:
Turns
motor
ON
when flipped up; turns motor
OFF
when
pressed down. Removal of yellow key disables
switch, preventing motor operation.
G.. Depth-of-Cut.Scale:
Shows depth of cut (per pass).
H.. Fence:
Supports workpiece laterally as it moves
across cutterhead; determines angle of cut when
edge or bevel joining.
I.. Fence.Bracket.Assembly:
Changes position of fence
relative to tables and secures it in position during
operation.
J.
Dust.Port:
Connects machine to dust collection
system. ALWAYS remove dust port if operating
machine without a dust collection system.
K.
Fence.Slide.Lock.Handle:
Adjusts position of fence
over tables. ALWAYS tighten lock before beginning
operations.
L.. Fence.Tilt.Lock.Handle:
Secures fence tilt angle.
Fence tilt can be adjusted between 90º–135º. ALWAYS
tighten lock before beginning operations.
A
B
C
D
E
F
G
H
I
K
L
J
Содержание W1876
Страница 52: ......
