Shop fox W1767, Руководство пользователя

Страница: 25 / 37

-22-
Model W1767 (For Machines Mfd. Since 08/15)
SE
RV
IC
E
Wheel.Replacement
To.replace.a.worn.out.or.damaged.wheel,.do.these.
steps:
1..
DISCONNECT THE MACHINE FROM POWER!
.
2..
Using a 5mm hex wrench, remove the wheel
retaining cap screws (see
Figure.15
).
3..
Swap the old wheel with the new.
4..
Re-install the four cap screws, and tighten in an
alternating pattern until the wheel is tight.
Figure.15. Wheel replacement.
SERVICE
This section covers the most common service adjustments
or procedures that may need to be made during the life
of your machine.
If you require additional machine service not included
in this section, please contact Woodstock International
Technical Support at (360) 734-3482 or send e-mail to:
tech-support@shopfox.biz .
General
MAKE. SURE. that. your. machine. is.
unplugged.during.all.service.procedures!.
If. this. warning. is. ignored,. serious.
personal.injury.may.occur.
Cap
Screw