manualshive.com logo in svg

Shop fox W1702, Руководство пользователя

Поделиться
Скачать
Shop fox W1702 Скачать руководство пользователя страница 25

-4-

J8=<KP

J8=<KP

I<8;D8EL8C9<=FI<FG<I8K@E>D8:?@E<%

=8@CLI<KF=FCCFN@EJKIL:K@FEJ9<CFNN@CC

I<JLCK@EG<IJFE8C@EALIP%

JkXe[Xi[JX]\kp@ejkilZk`fej

(% K_fifl^_cpi\X[k_\`ejkilZk`fedXelXcY\]fi\fg\iXk`e^pflidXZ_`e\%

Learn the applications, 

limitations and potential hazards of this machine. Keep manual in a safe, convenient place for future 
reference.

)%

 

B\\gnfibXi\XZc\XeXe[n\ccc`k%

Clutter and inadequate lighting invite potential hazards.

*%

 

>ifle[ Xcc kffcj%

If a machine is equipped with a three-prong plug, it must be plugged into a 

three-hole grounded electrical receptacle or grounded extension cord. If using an adapter to aid in 
accommodating a two-hole receptacle, ground using a screw to a known ground.

+%

 

N\Xi\p\gifk\Zk`feXkXcck`d\j%

Use safety glasses with side shields or safety goggles that meet 

the appropriate standards of the American National Standards Institute (ANSI). 

,%

 

8mf`[[Xe^\iflj\em`ifed\ekj%;FEFK

 operate this machine in wet or open flame environments. 

Airborne dust particles could cause an explosion and severe fire hazard.

-%

 

<ejli\Xcc^lXi[jXi\j\Zli\cp`egcXZ\

and in working condition.

.%

 

DXb\ jli\ k_\ dXZ_`e\ gfn\i jn`kZ_ `j `e k_\

F==

 gfj`k`fe

before connecting power to 

machine.

/%

 

B\\gk_\nfibXi\XZc\Xe#

free of clutter, grease, etc.

0%

 

B\\gZ_`c[i\eXe[m`j`kfijXnXp%

Visitors should be kept at a safe distance while operating unit.

Indicates an imminently hazardous situation which, if not avoided, WILL 
result in death or serious injury.

Indicates a potentially hazardous situation which, if not avoided, COULD 
result in death or serious injury.

Indicates a potentially hazardous situation which, if not avoided, MAY 
result in minor or moderate injury.

This symbol is used to alert the user to useful information about proper 
operation of the equipment, and/or a situation that may cause damage 
to the machinery.

NOTICE

Содержание W1702












































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды