-20-
Df[\cN(/)0D]^%J`eZ\0&((
FG
<
I
8
K@FEJ
JkfZb@ejg\Zk`fe
I\hl`i\d\ekj
?\i\Xi\jfd\ilc\jkf]fccfnn_\eZ_ffj`e^Xe[
af`ek`e^jkfZb1
•
;FEFKaf`ekfijli]XZ\gcXe\jkfZbk_XkZfekX`ej
cffj\befkj%
Injury to the operator or damage to the
workpiece can occur if the knots become dislodged
during the cutting operation.
•
;FEFKaf`ekfijli]XZ\gcXe\X^X`ejkk_\^iX`e
[`i\Zk`fe%
Cutting against the grain increases the
likelihood of stock kickback, as well as tear-out on
the workpiece.
•
Af`ek`e^Xe[jli]XZ\gcXe`e^n`k_k_\^iX`egif$
[lZ\jXY\kk\i]`e`j_Xe[`jjX]\i]fik_\fg\iXkfi%
Cutting with the grain is described as feeding the
stock on the jointer so the grain points down and
toward you as viewed on the edge of the stock (see
=`^li\)*
).
Note:
@]k_\^iX`eZ_Xe^\j[`i\Zk`feXcfe^k_\\[^\
f]k_\YfXi[#[\Zi\Xj\k_\Zlkk`e^[\gk_Xe[dXb\
X[[`k`feXcgXjj\j%
•
I\dfm\]fi\`^efYa\Zkj]ifdk_\jkfZb
.
Make sure
that any stock you process with the jointer is clean
and free of any dirt, nails, staples, tiny rocks or any
other foreign objects that may damage the jointer
blades.
•
FecpgifZ\jjeXkliXcnff[]`Y\ik_ifl^_pfli
af`ek\i%
Never joint MDF, particle board, plywood,
laminates or other synthetically made materials.
•
DXb\jli\XccjkfZb`jjl]]`Z`\ekcp[i`\[Y\]fi\
af`ek`e^%
Wood with a moisture content over 20%
will cause unnecessary wear on the knives and poor
cutting results.
•
;FEFKaf`ekjkfZbk_Xk`j\oZ\jj`m\cpnXig\[fi
kn`jk\[%
DXb\jli\pflinfibg`\Z\\oZ\\[jk_\d`e`dld
[`d\ej`fei\hl`i\d\ekjj\\
=`^li\j)+Æ),
Y\]fi\\[^\af`ek`e^fijli]XZ\gcXe`e^#fi`kdXp
Yi\Xbfib`ZbYXZb[li`e^k_\fg\iXk`fe
=`^li\)*%
Correct setting for grain
alignment.
N`k_>iX`e
8^X`ejk>iX`e
:FII<:K
@E:FII<:K
=<<;;@I<:K@FE
=<<;;@I<:K@FE
IFK8K@FE
IFK8K@FE
@E=<<;K89C<
FLK=<<;K89C<
@E=<<;K89C<
FLK=<<;K89C<
1
⁄
2
" Min.
1" Min.
10" Min.
=`^li\)+%
Minimum dimensions for edge
jointing.
1
⁄
2
" Min.
1" Min.
10" Min.
=`^li\),%
Minimum dimensions for
surface planing.
All manuals and user guides at all-guides.com
