ASSEMBLY
-12-
Clean Up
The exposed, unpainted surfaces of the machine
have been coated with an oil to prevent rust
during shipment. This oil needs to be removed
before operation. Use a solvent based degreaser
to remove the oil.
Never use flammables
such as gas or other petro-
leum-based solvents to
clean your machine.
These products have low
flash points and present
the risk of explosion and
severe personal injury!
Most solvents used to
clean machinery are
toxic when inhaled or
ingested. When using
these products, work in
a well ventilated area
and keep away from any
potential ignition
sources (pilot lights).
Always dispose of any
waste rags in a sealed
container to make sure
they do not cause fire or
environmental hazards.
Never smoke while using
any cleaning solvents.
Smoking may cause explo-
sion or risk of fire when
exposed to these products!
NOTICE
Avoid using any chlorine based solutions
because they will damage the painted sur-
faces. Always follow the instruction of the
product being used.
