ASSEMBLY
-8-
Installing Metal
Extension Wings
The
SHOP FOX
®
Heavy-Duty Metal Extension
Wings (
Figure 10
) can be installed on the
Model W1720 79" rails.
Hardware Bag Contents:
Qty
• Flat Washer
5
⁄
16
"
12
• T-Bolt
5
⁄
16
" -18 x 1"
12
• Hex Nut
5
⁄
16
"-18
12
To install the W1720 extension wings, do
these steps:
1.
Loosely install the T-bolts, washers and
hex nuts into the short sides of the exten-
sion wings.
2.
Insert the T-bolt heads into the rail T-slots
as shown in
Figure 11
.
3.
Slide the tables into place as shown in
Figure 12
. Note—
The tables slide into
place easily if you lift up while you slide
them into place.
4.
Place a straightedge across the top of the
wings, and tighten the nuts behind the
edge of the extension wings to secure the
wings in place.
Figure 11.
T-bolt and rail T-slot.
Figure 12.
Sliding in the wings.
Figure 10.
Extension wing box inventory.
