- 11 -
Power connector
[～LINE]
The included power cable should be plugged into
this connector.
Ground terminals
[ ]
These are the terminals to ground the main body
of the detector.
5-4 Display
The display shows a “Monitor screen” when the detector is started and can be
Switched to a “Parameter setting screen” and “
Validation screen
”when the key
or the key is pressed.
<Monitor screen> <Parameter setting screen> < Validation screen >
- 123.4uRIU 40℃ + 2 * PARAMETERS * * VALIDATION *
TEMP. UNSTABILIZE * SETTING * * *
<Monitor screen>
26 27 28 29
－ ＸＸＸ．ＸｕＲＩＵ ＸＸ ﾟＣ ＡＡ ±ＸＸ
ＡＡＡＡＡＡＡＡＡＡＡＡＡＡＡＡ
30
No.
Function
This indicates the refractive index in
RIU unit.
This indicates the temperature of the optical system.
One of the following is displayed in response to the detector status.
(1) LK : Key Lock status
(2) ER : Error status
(3) RD : Analyzable state （This sign will come on when the start-up sequence is completed.）
This indicates the current state of optical axis balance in a range of –99 to +99.
Press key to display –3 to +3.
□
24
□
25
□
28
Zero
□
29
□
26
□
27
