Shockwave S5, Руководство пользователя

Страница: 5 / 20

5
Strength of decks and deck mountings is the responsibility of the
boat builder or installer of the seats. SHOCKWAVE assumes no
liability for suspension modules that are incorrectly installed.
Incorrectly installed suspension modules can cause serious
injury or death and can cause damage to the vessel and the seat.
Prior to use be sure to pressurize the shock absorber! Do not
operate the seat without sufficient pressure in shock absorber or
serious injury and damage to the suspension module will result.
SETTING UP THE SUSPENSION MODULE
To achieve the best performance from the suspension module’s shock absorber, the pressure should be adjusted to attain
the proper sag setting. Sag is the amount the suspension compresses under the occupant’s weight and seat. Sag should be
set at 20% of total shock travel.
Warranty is void on suspension modules where incorrect
installation caused damage to the module.