DANGER
Incorrectly installed seats can cause damage to the seat and serious injury or death.
CAUTION
If the seat deck mounts are not parallel and
perpendicular to the deck they will distort the
suspension module and cause it to jam.
IMPORTANT
Warranty is void on seats where incorrect installation
causes damage to the seat. Strength of decks and
deck mountings is the responsibility of the boat builder
or installer of the seats. SHOCKWAVE assumes no
liability for seats that are incorrectly installed.
SEAT MOUNTING INSTRUCTIONS
6
SEAT MOUNTING REQUIREMENTS
•
The seat must only be installed on a competely flat surface of sufficient strength to support the fully loaded seat
without flexing.
•
The deck mounts or suspension module must not be modified.
•
Any modifications, alterations or addition of any equipment must be approved by SHOCKWAVE.
•
Ensure that the movement of the seat does not interfere with the vessel structure or equipment.
•
Ensure all fasteners are properly torqued.
•
Check operation of suspension after installation. It must not bind or stick.
