9
MAINTENANCE
Installation of the filter frame and filter mesh
Special note:
Be sure to install the filter mesh first
and then install the filter frame.
1.
To install the evaporator filter mesh and condenser
fitter mesh, point the back end of the filter mesh
toward the socket and then push the filter mesh
evenly and gently into the socket. Note: Install the
filter mesh in the reverse order of removal. The fitter
mesh must be installed Into place; otherwise, the filter
frame may not be installed into place. Install the filter
mesh gently so not to damage it.
2.
To install the evaporator fitter frame and condenser
filter frame, point the back end of the filter frame
toward the socket and then push the filter frame
evenly and gently into the socket. Note: Install the
filter frame in the reverse order of removal. Before
installing the filter frame you must make sure that the
filter mesh is installed. Install the filter frame gently
so not to damage it.
Cleaning of the handle and remote control
storage area
1.
Take the remote control out of the remote control
storage area in the direction shown by the arrow.
2.
Clean the handle position and remote control
storage areas of this unit with wet soft cloth.
Note:
the wet soft doth must be wringed out. Do not
dip water into this unit.
3.
If the remote control needs to be put back into the
remote control storage area, put it back into the
storage area in the reverse direction of removal.
Remote
control
Area for storing
remote control
