Shiro SC3129 Скачать руководство пользователя страница 8

SC3129 User Guide 

 

 

 

When checking the incoming number or outgoing number, press 

REDIAL/BACK 

key to auto 

pick up and dial out the number directly. 

 

HF (HANDSFREE) key 

While on-hook, press the 

HF 

key to go into handsfree mode. You can talk through the 

microphone and listen from the speakerphone without lifting the handset. While off-hook, 
press the 

HF 

key and put down the handset to go into handsfree mode. 

 

RING/HOLD key 

In the on-hook mode, press 

RING

 key, the phone LCD will display 

RING 1-8

, which means 

there are eight selectable ringing tones. Select your preferred ringing tone by pressing 

RING 

continuously. 
In off-hook mode, press 

RING/HOLD 

key to activate music on hold. To disable, press the 

RING/HOLD 

key again.   

 

BRIGHT/

÷

 key 

To adjust the contrast of the LCD, press the 

BRIGHT/ 

÷

key to adjust from Level 1-5. 

 

5. ADDITIONAL NOTES 

INCOMING CALL LCD INDICATOR 

When there is incoming call, the unit will be automatically display the caller number, date 
and time, and also display its serial number. If the incoming call is in private mode, it will 
display “__p__”; it will display “__0__” if exchange cannot determine the number; it will 
display “—E—“ if the call signal contains error. 
 

LCD BACKLIGHT FUNCTION

 

When there is incoming call or handset is off-hook, the LCD backlight will lit up. It will be on 
for about 6 seconds before going off. Without batteries, LCD backlight will not lit up at all. 
 

IN USE/INCOMING CALL LED INDICATOR 

When there is incoming call or the handset is off hook or in handsfree mode, the LED will 
blink. 
 

TROUBLESHOOTING GUIDE 

(Q) I do not hear any dial tone from the handset. 

(A) Ensure the handset cord is connected correctly from the handset to the handset cord jack 
at the base. Ensure you have plug in the telephone cable from the telephone to the wall 
socket correctly. If the problem persists, please check with your local dealer.

 

   

(Q) I could not see the caller’s number on the LCD when there is incoming call. 

(A) Ensure that you have subscribed Caller ID service from your local telecom provider.   

Содержание SC3129










Отзывы: