User Manual
Page 52
of 92
Bridge Filters
The Bridge Filters allows you to enable, add, edit, or delete the filter rules. When bridge filtering is
enabled, each frame is examined against every defined filter rule in sequence. When a match is found,
the appropriate filtering action (allow or deny) is performed. Up to 20 filter rules are supported with
bridge filtering.
Bridge Filters
To configure Bridge Filters:
1. From the
Advanced Menu
, select
Application > Bridge Filters
. This opens the Bridge Filters
page.
2. Check
Enable Bridge Filters
.
3. To add a rule, enter
Src
MAC address
,
Src Port
,
Dest MAC address
,
Dest Port, Protocol,
and
Mode
, then click
Add
.
Note:
You can also edit a rule that you created using the
Edit
checkbox. You can delete using
Delete
.
4. Click
Submit
to temporarily activate the settings.
5. To make changes permanent, click
Save Settings
.
