Shire Paradise Bar, Инструкция по эксплуатации

Страница: 14 / 24

14
60mm Screws
(A0035)x03
Back Panel
(A5002) x01
GB-IE
Remove the transport blocks from the bottom of the panels gently with a hammer.
Drill the panels as shown. Some of the holes will be used in later steps.
The Back panel A5002 fits the full length of the floor and the cladding overhangs the floor.
Push the Plain end A5005 up to it and ensure both panels are tight to the floor and the framework is flush
before fixing. Do not screw to the floor yet!
04
If using a drill or
electric screwdriver
carefully but firmly
push the opposite end
to the screwdriver bit
into the screw head
and keep the pressure on to prevent
the screwdriver spinning in the
screw.
Plain end
(A5005) x01
REMOVE
Transport blocks
5 mm