3
7.
Your browser will be directed to the Firmware Upgrade page after appr. 20 seconds:
8.
On that page, click “Browse” to navigate to the folder where you unzipped the firmware.
Select the
mpx-3_wifi_1.5.0.3R3.rom
file and click “Open” to start the update.
9.
When the update is complete, the page below will appear:
Click on “Reboot” and confirm in the dialog that appears.
10.
After 10 to 20 seconds, the main web page will appear again, unless your computer switched
to another access point while the WiFi interface rebooted.
11.
Now go back again to MPX-Config3 and enter:
PSMDWI,V
The MiniPlex should respond with:
PSMDWI,VER,1.5.0.3R3
A
$PSMDWC,No response
message appears if the WiFi interface was still starting up. Just
try again until the version message appears.
12.
Now we have to re-initialize the WiFi interface using command:
PSMDWI,A
The MiniPlex responds with:
$PSMDWI,Initializing WiFi interface (V1.5.0.3R3, wait 40s)...
This does indeed take approx. 40 seconds. Eventually
$PSMDWI,RDY
will appear.
This finalizes the update procedure. You should now be able to connect with MPX-Config3 using
both TCP and UDP.
