PAGE 9
SB-8811 INSTRUCTION & OPERATION MANUAL
EDID FUNCTION
Switcher will
LEARN
destination EDID and
pass the selected source.
6.3 LEARNING
EDID
Learning EDID from Destination to Source
NOTE :
The already learned EDID cannot be modified. You can only rebuild a new Learning EDID.
For example;
When the Source has "Learned" the EDID data from a destination, It will save that EDID
information into EPROM and the EDID data cannot change.
Please select new learning destination to sources or change to one of the embedded EDID modes
when you want to remove the learning EDID memory from EPROM
.
Press
Learning EDID setup
EDID
>
SOURCE
>
ENTER
DESTINATION
>
EDID function for DVI Matrix Switcher
Press EDID > DESTINATION Button:
EDID
LEARNING
The LCM will be show LEARNING.
Press
6.2 RESET
EDID Return To Factory default
EDID
>
RECALL
>
ENTER
How to RESET EDID mode
EDID
RESET EDID
Press EDID button : The LCM will show the current EDID status.
Press RECALL button : The LCM will show the RESET EDID.
Press ENTER to confirm entries.
The EDID will return to FSS mode and resolution 1280x1024-60Hz.
RESET To the FACTORY DEFAULT (1280x1024).
EDID
3.1280
x
1024-60HZ DVI-D