REMOTE CONTROL
Before making any connections to the switcher. Observe the following:
Ensure the mains voltage supply matches the label on the supplied plug- Pack (+/- 10%)
Ensure that the power switch is OFF
Ensure that all system grounds (earth) are connected to a common point.
Avoid powering equipment within a system from multiple power sources that may be separated by large distances
Connect all audio video sources and destination equipment
Power up all source and destination audio-visual sources
For each destination output select the appropriate input source by using the front panel input 1~8 select buttons. the supplied IR remote
control. Or through the RS-232 serial communication port.
Upon power up the switcher will return to its last used setting before Powered down.
REMOTE CONTROL
1. & 2. SWITCH POWER ON or OFF:
Controller with a power ON and OFF
3. DESTINATION : 1 thru 8 OUTPUT SELECTION:
Press the destination button to select the output display channel.
4. SOURCE : 1 thru 8 INPUT SOURCE SELECTION:
Press input 1~8 sources with selection button.
5. FUNCTION KEY:
ALL - function selection button
OFF - function selection button
RECALL - function selection button
ENTER - function selection button
MEMORY - function selection button
LOCK - function selection button
7