EDID FUNCTION FOR HDMI MATRIX SWITCHER
EDID Setup
To Change the EDID Setup
Step 1.
Press the
EDID
button
The display will show the currently selected EDID mode
Step 2.
Press
SOuRCE
#1 or #2 button row
The button will flash blue and the display will show the current
Embedded
EDID
Status.
Step 3.
Press the
ENTER
button
To set
EDID
mode. The switcher will return to operation mode.
Operation will abort if no keys are pressed within 5 seconds.
Embedded EDID Modes
Total 8 EDID Modes
Embedded EDID setup
Press
EDID > SOURCE > ENTER
SOuRCE #1 or SOuRCE #2
To select Embedded EDID mode or LEARNING mode.
Press
EDID
button: The LCM will show the current EDID status.
Repeatedly depressing the
Source 1
button will cycle
up
thru the options.
Repeatedly depressing the
Source 2
button will cycle
down
thru the options.
Select Embedded EDID :Mode 1 :
FSS
Mode 2 :
H24-3D
Mode 3 :
H24-3D-M
Mode 4 :
H36-3D
RESET
EDID Return To Factory default
How to RESET EDID mode
Press
EDID > SOURCE > ENTER
To RESET the FACTORY DEFAULT (1080p-2CH).
Press
EDID
button : The LCM will show the current EDID status.
Press
RECALL
button : The LCM will show the RESET EDID.
Press
ENTER
to confirm entries.
The EDID will return to FSS mode and resolution 1080p-2CH.
EDID FUNCTION FOR HDMI MATRIX SWITCHER
LEARNING EDID
Learning EDID from Destination to Source
Learning EDID Setup
Press
EDID >DESTINATION >SOURCE >ENTER
Press
EDID > DESTINATION
Button:
The LCM will be show LEARNING.
Switcher will
LEARN
destination EDID and pass the selected source.
NOTE : The already learned EDID cannot be modified. You can only rebuild a new Learning EDID.
For example:
When the Source has “Learned” the EDID data from a destination, It will save that EDID information into EPROM
and the EDID data cannot change.
Please select new learning destination to sources or change to one of the embedded EDID modes when you want to remove
the learning EDID memory from EPRPM.
10
EDID FUNCTION
Mode 5 :
H36-3D-M
Mode 6 :
1280x1024-60Hz
Mode 7 :
1920x1200-60Hz
Mode 8 :
AuTO
