LEARNING EDID MODE-#1
Learning EDID from Destination to Source
Single Learning Mode#1 EDID setup
Press
EDID > DESTINATION > SOURCE > ENTER
Key Press Sequence:
EDID > DESTINATION # > SOURCE # > ENTER
The EDID for HDMI has been learned from the Destination port to the Source port.
1. Press
EDID
button. The LCM will show the current EDID status.
2. Press
DESTINATION (1 -8)
button.The LCM will show the LEARNING HDMI.
Switcher will LEARN destination HDMI EDID.
3. Press
SOURCE (1 -8)
button. Switcher will Learning destination HDMI EDID and
pass to the selected source.
4. Press
ENTER
to confirm changes. The LCM will return to the default screen
showing selected matrix routing status.
NOTE : The already learned EDID cannot be modified. You can only rebuild a new Learning EDID.
For Example:
When the Source has “Learned” the EDID data from a destination, It will save that EDID information into EPROM and
the EDID data cannot change. Please select new learning destination to sources or change to one of the embedded EDID modes when
you want to remove the learning EDID memory from EPROM.
14
EDID FUNCTION