FRONT PANEL
FRONT PANEL
9. FUNCTION KEY - EDID
Used to display change current
EDID
mode.
- Press
EDID
to select new EDID mode or select
- Press
SOURCE
row #1 or #2 Select EDID modes.
- Press
ENTER
to ready memory location.
- Or press
EDID
again to cancel operation.
Operation completes.
Note : Operation will abort if no keys are pressed within 5 seconds.
10. FUNCTION KEY - RECALL
The system will show previously stored presets, up to a total of 16. Presets are stored in
local memory using Source keys 1 thru 8 or Destination keys 1 thru 8 as the memory preset
location.
- Press
RECALL
button.
- Press 1 thru 8 on either Source or Destination row.
- Press
ENTER
The pre-set confi guration will execute.
Operation completes.
Note: Operation will abort if no keys are pressed within 5 seconds.
- Or press RECALL again to cancel operation.
11. FUNCTION KEY - MEMORY
The system will show store presets, up to a total of 16. Presets are stored in local memory
using Source keys 1 thru 8 or Destination keys 1 thru 8 as the memory preset location.
- Confi gure desired matrices.
- Press
MEMORY
button.
- Press 1 thru 8 on either Source or Destination row.
- Press
ENTER
to ready memory location.
- Or press
MEMORY
again to cancel operation.
Operation completes.
Note : Operation will abort if no keys are pressed within 5 seconds.
- Or press MEMORY again to cancel operation.
6
