background image

CONTENTS 

PACKAGE CONTENTS .................................................. 1

INTRODUCTION ..............................................................2

FEATURES ....................................................................... 2

SPECIFICATIONS ............................................................ 3

FRONT PANEL ................................................................. 4

BACK PANEL ................................................................ 10

REMOTE CONTROL ...................................................... 14

REMOTE PROTOCOL COMMANDS ............................ 15

EDID FUNCTIONS ......................................................... 17

TYPICAL APPLICATION ............................................... 22

IR EXTENDER ............................................................... 25

RS-232 / ETHERNET SERIAL INTERFACE  .................. 27

PACKAGE CONTENTS

Check that you have the following components:

•  SB-5688CAP Matrix Switcher
•  RS-232 V2.0 / Ethernet V2.0 Protocol Instructions
•  IR Remote Control (SW-5688CAP)
•  (8) Individual IR Remote Controls (SW-5688CAP-IR01~IR08)
•  19 inch ear mount bracket (Part # 2U-440L)
•  SB-100 IR Extender Receiver Set
•  SB-101 IR Extender Transmitter Set
•  CD Contents: Manual, Windows GUI, ISP V1.0 Windows driver
•  RS-232 Cable 6 feet (2M)
•  HDMI Locking Post Replacement Screws
• Users Guide 
•  Worldwide Universal Power Supply 100~240VAC, AC 50/60Hz

•  Optional: SB-100C IR Extender Receiver Cable (6.5ft (2M))
•  Optional: SB-101C IR Extender Transmitter Cable (6.5ft (2M))

-- SB-6320T HDBaseT

 Transmitters & SB-6320R HDBaseT

 

Receiver sold separately –

1

HDMI-HDBaseT

 AUDIO MATRIX SWITCHER SERIES

Thank you for purchasing the SB-5688CAP HDMI-HDBaseT

 Matrix Switcher with PoH (Power Over HDBaseT

). You will 

fi nd this unit easy to install and highly reliable but it is essential that you read this manual thoroughly before attempting to 
use 8x8 HDMI-HDBaseT

 Matrix switcher.

TABLE OF CONTENTS

SAFETY PRECAUTIONS 

Please read all instructions before attempting to unpack, install or 
operate this equipment and before connecting the power supply. 
Please keep the following in mind as you unpack and install this 
equipment:
•   Always follow basic safety precautions to reduce the risk of fi re, 
electrical shock and injury to persons.
•  To prevent fi re or shock hazard, do not expose the unit to rain, 
moisture or install this product near water.
•   Never spill liquid of any kind on or into this product.
•   Never push an object of any kind into this product through any 
openings or empty slots in the unit, as you may damage parts 
inside the unit.
•  Do not attach the power supply cabling to building surfaces.
•  Use only the supplied power supply unit (PSU). Do not use the 
PSU if it is damaged.
•  Do not allow anything to rest on the power cabling or allow any 
weight to be placed upon it or any person walk on it.
•  To protect the unit from overheating, do not block any vents or 
openings in the unit housing that provide ventilation and allow for 
suffi cient space for air to circulate around the unit. 

DISCLAIMERS

The information in this manual has been carefully checked and 
is believed to be accurate. We assume no responsibility for any 
infringements of patents or other rights of third parties which may 
result from its use.

We assume no responsibility for any inaccuracies that may be 
contained in this document. We make no commitment to update 
or to keep current the information contained in this document.

We reserve the right to make improvements to this document 
and/or product at any time and without notice.

COPYRIGHT NOTICE

No part of this document may be reproduced, transmitted, 
transcribed, stored in a retrieval system, or any of its part translated 
into any language or computer fi le, in any form or by any means 
— electronic, mechanical, magnetic, optical, chemical, manual, 
or otherwise — without express written permission and consent.
© Copyright 2016. All Rights Reserved.
Version 2.5 JULY 2016
5688CAP-20140721-001
ENCL005688CAPA0

TRADEMARK ACKNOWLEDGMENTS

All products or service names mentioned in this document may 
be trademarks of the companies with which they are associated.

IMPORTANT WARRANTY INFORMATION.

If you remove the HDMI screw posts, you must 
use the provided HDMI Locking Post replacement 
screws to keep the internal HDMI jack secure. 
Removing the HDMI screws without installing the 
HDMI Locking Post replacement screws will void 
your warranty.

LOOK A PUPPY!!         NOW READ THIS!! 

Содержание SB-5688CAP

































Отзывы: