manualshive.com logo in svg

Shinybow USA SB-5685LCM, Инструкция по эксплуатации

Поделиться
Скачать
Shinybow USA SB-5685LCM Скачать руководство пользователя страница 13

EDID FUNCTION

EDID FUNCTION SETUP

EDID Setup

To change the EDID setup

Step 1 . Press the EDID button

The display will show the currently selected EDID mode

Step 2 . Press SOURCE #1 or #2 button row

The button will 

fl

 ash blue and the display will show the current Embedded 

EDID Status.

Step 3 . Press the ENTER button

To set EDID mode. The switcher will return to operation mode.

Operation will abort if no keys are pressed within 5 seconds.

Embedded EDID modes

Total 8 EDID Modes

Embedded EDID setup

Press      EDID   >   SOURCE   >   ENTER

SOURCE #1 or SOURCE #2

To select Embedded EDID mode or LEARNING mode.
Press EDID button : The LCM will show the current EDID status.

Repeatedly depressing the source 1 button will cycle up thru the options.
Repeatedly depressing the source 2 button will cycle down thru the options.

Embedded EDID :

Mode 1 : FSS
Mode 2 : H24-3D
Mode 3 : H24M-3D
Mode 4 : H36-3D
Mode 5 : H36M-3D
Mode 6 : DVI 1280x1024-60Hz
Mode 7 : DVI 1920x1200-60Hz
Mode 8 : AUTO

EDID FUNCTION : 7X EMBEDDED EDID MODES

EDID Function

8x Embedded EDID Modes

Mode 1. FSS

 (Fast Speed Start)

Fast Speed Start mode shortens the startup time of the switcher. Selecting 
this mode does not force the EDID setup to be cancelled. Users may 

fi

 rst 

select one EDID mode from mode 2 to 3, and then select mode 1 for fast 
speed start.

Mode 2. H24-3D

 (1080p-24 bits)

Audio Support : PCM 2CH

Mode 3. H24-3D-M

 (1080p-24bits)

Audio Support : MAT(MLP) 7.1CH, PCM 2CH, One Bit Audio 2CH, AC-3 
5.1CH, DTS 5.1CH, PCM 7.1CH, Dolby D 7.1CH, DTS-HD 7.1CH

Mode 4. H36

 (1080p-36 bits)

Audio Support : PCM 2CH

Mode 5. H36-M

 (1080p-36 bits)

Audio Support : MAT(MLP) 7.1CH, PCM 2CH, One Bit Audio 2CH, AC-3 
5.1CH, DTS 5.1CH, PCM 7.1CH, Dolby D 7.1CH, DTS-HD 7.1CH

10

Содержание SB-5685LCM






















Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды