Shinybow USA SB-5684K, Инструкция по эксплуатации

Страница: 7 / 24

5
FRONT PANEL
FRONT PANEL
9. FUNCTION KEY - EDID:
Used to display change current EDID mode.
- Press EDID to select new EDID mode or select
- Press SOURCE row #1 or #2 Select EDID modes.
- Press ENTER to ready memory location.
- Or press EDID again to cancel the operation.
Operation completes.
Note: Operation will abort if no keys are pressed within 5 seconds.
10. FUNCTION KEY - RECALL:
The system will show previously stored presets, up to a total of (12). Presets are stored in
local memory using Source keys 1 thru 8 or Destination keys 1 thru 4 as the memory preset
location.
- Press RECALL button.
- Press 1 THRU 8 on either Source or 1 THRU 4 on Destination row.
- Press ENTER . The pre-set configuration will execute.
Operation completes.
Note: Operation will abort if no keys are pressed within 5 seconds.
- or press RECALL again to cancel the operation.
11. FUNCTION KEY - MEMORY:
The system will show stored presets, up to a total of (12). Presets are stored in local memory
using Source keys 1 thru 8 or Destination keys 1 thru 4 as the memory preset location.
- Configure desired matrices.
- Press MEMORY button.
- Press 1 THRU 8 on either Source or 1 THRU 4 on Destination row.
- Press ENTER to ready memory location.
- or press MEMORY again to cancel the operation.
Operation completes.
Note: Operation will abort if no keys are pressed within 5 seconds.
- Or press MEMORY again to cancel the operation.