Shinybow USA SB-5669CK Скачать руководство пользователя страница 9

Страница: 9 / 40

FRONT PANEL

16. SELECT (7) EMBEDDED EDID MODES:

Used to display/change current EDID mode.

- Press

EDID

to select new EDID mode.

- Press

SOURCE

row #1 or #2. Select (7) Embedded EDID modes.

- Press

ENTER

to ready memory location.

- Or press

EDID

again to cancel operation.

Operation completes.

Note: Operation will abort if no keys are pressed within 5 seconds.

SELECT LEARNING MODE-#1:

Select external

LEARNING

EDID mode-#1 (Single mode)

- Press

EDID

to select new Learning EDID mode-#1.

- Press

DESTINATION

again, press the same Destination

#1 THRU #16

to learn the

HDBaseT

™

EDID out port. The EDID for HDBaseT

™

(CATx) has been learned.

- Press

SOURCE

press Source row

#1 THRU #16

. The switcher will learn the HDMI or

HDBaseT

™

EDID destination and pass to the select sources.

- Press

ENTER

to ready memory location.

- Or press

EDID

again to cancel operation.

Operation completes.

Note: Operation will abort if no keys are pressed within 5 seconds.

SELECT LEARNING MODE-#2:

Select external

LEARNING

EDID mode-#2 (Multiple mode)

- Press

EDID

to select new Learning EDID mode-#2.

- Press

OFF

, the LCM show Learning mode #2 status.

- Press

DESTINATION

button

#1 THRU #16

to setup learning mode-#2. The LCM will

show “L”. The HDMI or HDBaseT

™

EDID destination for (CATx) has been learned.

- Press

ENTER

to ready memory location.

- Or press

EDID

again to cancel operation.

Operation completes.

Note: Operation will abort if no keys are pressed within 5 seconds.

Содержание SB-5669CK









































Результаты поиска

Содержание SB-5669CK

Отзывы:

Бренды по названию

Популярные бренды

Shinybow USA SB-5669CK, Инструкция по эксплуатации

Результаты поиска

Содержание SB-5669CK

Отзывы:

Бренды по названию

Популярные бренды