FRONT PANEL
FRONT PANEL
2
4
POWER SWITCH
DESTINATION SELECT BUTTONS
1
7
The power switch turns the unit on and off. The LED will illuminate red to indicate that the switcher is ON
and is receiving power.
The Switcher will remember that last state during a power cycle.
When power is removed and resorted, the last configuration will be evoked.
INPUT STATUS DISPLAY
4
Input sources 1 to 4 LED illuminates blue to indicate that a video source is present on that input.
Separate outputs 1 thru 4 select buttons are provided for each destination assignment.
Routing can be Source to Destination or one source to multiple destinations.
Example : Press Destination 1,3,4 then press Source 2 will route Input 2 to Output 1,3,4 respectfully.
STATUS DISPLAY
2
Front panel status display shows current matrix routing configuration. This same display also shows
particular configuration settings depending on your current function. In run mode (as shown above),
the display shows each Output (destination ) Channel shows which input (source) is assigned.
IR SENSOR
3
The IR sensor receives IR commands from the supplied remote controller or third party IR emitter.
SOURCE SELECT BUTTONS
5
Separate inputs 1 thru 4 select buttons are provided each source selection.
1
3
7
5
PAGE 8
SB-5645AK INSTRUCTION & OPERATION MANUAL
8
19 INCH EAR MOUNT PAIR
Converts desktop to 19 inch rack mount. Bracket (part number: 1U-440L) INCLUDED.
Image shows rack mount bracket attached.
8
6
EDID MODE SELECT BUTTONS
Used to select EDID mode using buttons Source button
#1
or
#2
.
6
POWER
1
2
3
4
ALL
OFF
ENTER
RECALL
LOCK
MEMORY
EDID
1
2
3
4
IR
SOURCE STATUS
1
2
3
4
DESTINATION
SOURCE
4x4 HDMI Matrix Switch with Auxiliary Audio I/O
SB-5645AK
DESTINATION
SOURCE
OUTPUT 1 2 3 4
SOURCE 1 2 3 4
ARC
AUX
