Shinybow USA SB-5588CT, Инструкция по эксплуатации

Страница: 7 / 16

5
REMOTE CONTROL
Before making any connections to the SB-5588CT. Observe the following:
• Ensure the mains voltage supply matches the label on the supplied plug- Pack (+/- 10%).
• Ensure that the power switch is OFF.
• Ensure that all system grounds (earth) are connected to a common point.
• Avoid powering equipment within a system from multiple power sources that may be separated by large distances.
• Connect all audio video sources and destination equipment.
• Power up all source and destination audio-visual sources.
• For each destination output select the appropriate input source by using the front panel input 1-8 select buttons. The supplied IR
remote control. Or through the RS-232 serial communications port.
• Upon power up the switcher will return to its last used setting before Powered down.
REMOTE CONTROL
1. & 2. SWITCH POWER ON or OFF:
Controller with a power ON and OFF
3. INPUT 1~8 : TV VIDEO DISPLAYS INPUT SETUP:
Input -TV 1 ~ Input -TV 8 :
CAT5-1 Component Video (YPBPR) to HDTV Display
CAT5-2 Digital Audio (PCM)/Audio to Audio Speaker
4. OUTPUT 1~8 : AV SOURCES OUTPUT SETUP:
Output -1 ~ Output -8 :
AV-8 Component Video (YPBPR) Signal source device
Digital Audio (PCM)/Audio Signal source device