FRONT PANEL
FRONT PANEL
13. FUNCTION KEY - VOL / BAL ( Volume / Balance )
VOLUME:
To affect the volume on any Output,
- Press VOL / BAL button once.
- Select 1 thru 8 on the Destination row, for the Output you wish to change.
- Press or – (Source #1 or #2 ) button to adjust the audio volume level.
- Press
ENTER
to store the new setting.
Repeatedly depressing the Source 1 button will decrease the volume setting.
Repeatedly depressing the Source 2 button will increase the volume setting.
With each push, the button will fl ash blue and the display will show the current Audio Volume setting.
The available options are “0” thru “100” in increment of “1”.
BALANCE:
To affect the balance on any Output,
- Press VOL / BAL button once.
- Select 1 thru 8 on the Destination row, for the Output you wish to change.
- Press Balance L or R (Source #3 or #4 ) button to adjust the audio balance.
- Press
ENTER
to store the new setting.
Repeatedly depressing the Source 3 button will increase the Left channel and decrease the Right channel.
Repeatedly depressing the Source 4 button will decrease the Left channel and increase the Right channel.
With each push, the button will fl ash blue and the display will show the current Audio Volume.
The available options are Audio Left = “0” thru “50” and Audio Right = ”51” thru “100” in increments of “1”.
Operation completes.
Note: Operation will abort if no keys are dressed within 5 seconds.
14. FUNCTION KEY - MEMORY
The system will show store presets, up to a total of 16. Presets are stored in local memory
using Source keys 1 thru 8 or Destination keys 1 thru 8 as the memory preset location.
- Confi gure desired matrices .
- Press
MEMORY
button.
- Press 1 thru 8 on either Source or Destination row.
- Press
ENTER
to ready memory location.
- Or press
MEMORY
again to cancel operation.
Operation completes.
Note: Operation will abort if no keys are dressed within 5 seconds.
5