5
FRONT PANEL
FRONT PANEL
13. FUNCTION KEY - VOL / BAL ( Volume / Balance ):
VOLUME
To affect the volume on any Output,
- Press
VOL / BAL
button once.
- Select
1 THRU 4
on the Destination row, for the Output you wish to change.
- Press
or
–
(Source #1 or #2 ) button to adjust the audio volume level.
- Press
ENTER
to store the new setting.
Repeatedly pressing the Source 1 button will decrease the volume setting.
Repeatedly pressing the Source 2 button will increase the volume setting.
With each push, the button will flash blue and the display will show the current Audio Volume setting.
The available options are “0” thru “100” in increment of “1”.
BALANCE
To affect the balance on any Output,
- Press
VOL / BAL
button twice.
- Select
1 THRU 8
on the Destination row, for the Output you wish to change.
- Press
BALANCE L
or
R
(Source #3 or #4 ) button to adjust the audio balance.
- Press
ENTER
to store the new setting.
Repeatedly depressing the Source 3 button will increase the Left channel and decrease the Right channel.
Repeatedly depressing the Source 4 button will decrease the Left channel and increase the Right channel.
With each push, the button will flash blue and the display will show the current Audio Volume.
The available options are Audio Left = “0” thru “50” and Audio Right = ”51” thru “100” in increments of “1”.
Operation completes.
Note: Operation will abort if no keys are pressed within 5 seconds.
14. FUNCTION KEY - MEMORY:
The system will show store presets, up to a total of 8. Presets are stored in local memory
using Source keys 1 thru 4 or Destination keys 1 thru 4 as the memory preset location.
- Configure desired matrices.
- Press
MEMORY
button.
- Press
1 THRU 4
on either Source or Destination row.
- Press
ENTER
to ready memory location.
- Or press
MEMORY
again to cancel operation.
Operation completes.
Note: Operation will abort if no keys are pressed within 5 seconds.
