Shinybow USA SB-4140LCM Скачать руководство пользователя страница 9 | Manualshive

Страница: 9 / 16

Shinybow USA SB-4140LCM Скачать руководство пользователя страница 9

7

REMOTE CONTROL

Before making any connections to the SB-4140LCM. Observe the following:

Ensure the mains voltage supply matches the label on the supplied plug- Pack (+/- 10%).

Ensure that the power switch is OFF.

Ensure that all system grounds (earth) are connected to a common point.

Avoid powering equipment within a system from multiple power sources that may be separated by large distances.

Connect all audio video sources and destination equipment.

Power up all source and destination audio-visual sources.

For each destination output select the appropriate input source by using the front panel input 1-4 select buttons. The supplied IR remote control.
Or through the RS-232 serial communications port.

Upon power up the switcher will return to its last used setting before Powered down.

REMOTE CONTROL

IR REMOTE : SW-4144
IR PCB : RA-02

1./2. SWITCH POWER ON or OFF:

Controller with a power ON and OFF

3. OUTPUTS: 1 - 4 OUTPUT SELECTION:

Press the destination button to select the output display channel.

4. SOURCE : 1 thru 4 INPUT SOURCE SELECTION

Press input 1~4 sources with selection button

5. FUNCTION KEY

ALL - function selection button
OFF - function selection button
RECALL - function selection button
DEMO or ENTER - function selection button
MEMORY - function selection button
LOCK - function selection button

«
...
7
8
9
10
11
...
»

Содержание SB-4140LCM

















Отзывы:

Нет отзывов