Shinybow USA SB-4106, Инструкция по эксплуатации, Страница: 7 / 12

5
REMOTE CONTROL
Before making any connections to the SB-4106. Observe the following:
• Ensure the mains voltage supply matches the label on the supplied plug- Pack (+/- 10%).
• Ensure that the power switch is OFF.
• Ensure that all system grounds (earth) are connected to a common point.
• Avoid powering equipment within a system from multiple power sources that may be separated by large distances.
• Connect all audio video sources and destination equipment.
• Power up all source and destination audio-visual sources.
• For each destination output select the appropriate input source by using the front panel input 1-4 select buttons. The supplied IR
remote control.
• Upon power up the switcher will return to its last used setting before Powered down.
REMOTE CONTROL
1. SWITCH POWER ON or OFF:
Controller with a power ON and OFF
2. INPUTS: 1-4 VGA DEVICE SOURCES:
Input - Source 1~4: VGA Signal source device # 1~4
HOW TO SETUP IR CODES:
IR TYPE: uPD6121G
IR CODE: 08F7
POWER ON : 08F7 0BF4
POWER OFF: 08F7 0BF4
INPUT#1 : 08F7 10EF
I NPUT#2 : 08F7 00FF
INPUT#3 : 08F7 1BE4
INPUT#4 : 08F7 18E7