5
REMOTE CONTROL
Before making any connections to the SB-3877. Observe the following:
•
Ensure the mains voltage supply matches the label on the supplied plug- Pack (+/- 10%)
•
Ensure that the power switch is OFF
•
Ensure that all system grounds (earth) are connected to a common point.
•
Avoid powering equipment within a system from multiple power sources that may be separated by large distances
•
Connect all audio video sources and destination equipment
•
Power up all source and destination audio-visual sources
•
For each destination output select the appropriate input source by using The front panel input select buttons. The supplied IR remote
control. Or through the RS-232 serial communications port.
•
Upon power up the switcher will return to its last used setting before Powered down.
REMOTE CONTROL
1. & 2. SWITCH POWER ON or OFF:
Controller with a power ON and OFF
3. OUTPUT-1 RESOLUTION SET & OSD:
Setup the output-1 resolutions or manual OSD.
4. OUTPUT-2 RESOLUTION SET & OSD:
Setup the output-2 resolutions or manual OSD.
5. SELECT VGA OUTPUT RESOLUTIONS:
Select VGA output resolutions as following: SVGA 800x600, XGA
1024x768, SXGA 1280x1024, WXGA 1366x768, WSXGA+1680x1050,
MAX. WUXGA 1920x1200.
6. SELECT HDMI OUTPUT RESOLUTIONS:
Select HDMI output resolutions as following: 720p, 1080x720, 1080p
1920x1200 MAX.
7. MANUAL OSD:
OSD to setup or Adjust output resolutions and color.
8. AUDIO VALUE ADJUSTMENT:
OSD to setup or Adjust output resolutions and color.
9. SELECT OUTPUT-1 SOURCES:
Output-1 for audio-video 1 to 8 source selections
10. SELECT OUTPUT-2 SOURCES:
Output-2 for audio-video 1 to 8 source selections.
